Experimental study of process parameter for surface roughness in WEDM

Kumar, A.; Dutt, N.; Singh, Varun Pratap et al.

dc.contributor.author	Kumar, A.
dc.contributor.author	Dutt, N.
dc.contributor.author	Singh, Varun Pratap et al.
dc.date.accessioned	2023-07-04T09:12:32Z
dc.date.available	2023-07-04T09:12:32Z
dc.date.issued	2022-08
dc.identifier.uri	https://doi.org/10.56697/JMEP.2022.1109
dc.identifier.uri	http://hdl.handle.net/123456789/4203
dc.description	Paper published in the journal - Journal of Mechanical Engineering; Volume 01, Issue 01, pp. 7-13, 2022	en_US
dc.description.abstract	Wire cut Electrical-Discharge Machining (WEDM) is a machining process which utilizes a thin wire (around 0.18mm) for material removal. In modern machining of complex object, it plays an important role. Process parameters have great in-fluence on WEDM. MRR, SR and WT are varying process parameters. In this article surface roughness (SR) in WEDM process was analysed using Taguchi method. To val-idate the results analytical and experimental results were investigated. In experiments it was observed, when peak current value was increased, SR value also increases and in resultant a rough surface was produced. Peak current was observed as most influential parameter with contribu-tion of 82.12%.	en_US
dc.language.iso	en	en_US
dc.publisher	Jalpaiguri Government Engineering College	en_US
dc.subject	Published Papers	en_US
dc.subject	Mechanical Engineering	en_US
dc.subject	Wire cut Electrical Discharge Machining	en_US
dc.subject	Material Removal Rate	en_US
dc.subject	ANNOVA	en_US
dc.subject	Die Steel Machining	en_US
dc.title	Experimental study of process parameter for surface roughness in WEDM	en_US
dc.type	Article	en_US