Study of material removal rate process parameter in WEDM

Kumar, Amit; Kumar, Ashwani; Singh, Varun Pratap et al.

dc.contributor.author	Kumar, Amit
dc.contributor.author	Kumar, Ashwani	en_US
dc.contributor.author	Singh, Varun Pratap et al.	en_US
dc.date.accessioned	2023-07-04T08:18:52Z
dc.date.available	2023-07-04T08:18:52Z
dc.date.issued	2022-12
dc.identifier.uri	https://doi.org/10.56896/IJMMST.2022.1.2.010
dc.identifier.uri	http://hdl.handle.net/123456789/4200
dc.description	Paper published in the journal - International Journal of Materials, Manufacturing and Sustainable Technologies (IJMMST); Vol. 1, Issue 2, page 31-42, 2022	en_US
dc.description.abstract	Wire cut Electrical Discharge Machining is known as nontraditional machining process. It has broad application in complex part or geometry machining. It is known as a non-contact process. The main objective of this research work is to investigate the influence of process parameters of Wire cut Electrical-Discharge Machining in material removal rate. Die steel D3 has been selected as workpiece material for study. The process parameters are peak current, pulse on time and wire tension. In experimental analysis it was concluded that on MRR the most influential process parameter is peak current with contribution of 86.02 %. Pulse of time has 12.29 % contribution and wire tension has minimum contribution of 1.12 % with 0.57% error in the study.	en_US
dc.language.iso	en	en_US
dc.publisher	International Journal of Materials, Manufacturing and Sustainable Technologies (IJMMST)	en_US
dc.subject	Published Papers	en_US
dc.subject	Mechanical Engineering	en_US
dc.subject	Wire cut Electrical Discharge Machining	en_US
dc.subject	ANNOVA	en_US
dc.subject	Peak Current	en_US
dc.subject	Die Steel Machining	en_US
dc.title	Study of material removal rate process parameter in WEDM	en_US
dc.type	Article	en_US