School of Engineering: Recent submissions

Now showing items 741-760 of 851

Development and characterization of Al-Mg-V2O5 (Ni) by powder metallurgy route: A major project report

Goel, Saksham; Chopra, Prateek (2015)
Laboratory Study of Drilling Fluid on HTHP Wells

Sudharsan, J (M-Tech (PE), Department of Earth Science & Petroleum Engineering, College of Engineering Studies, 2015)
Study of Reservoir Compartmentalization through Reservoir Modelling & Production data Analysis

Karthik, S. Girrish; Raj Kumar, B (M-Tech (PE), Department of Earth Science & Petroleum Engineering, College of Engineering Studies, 2015)
Optimization of air drilling parameters & well completion strategies for maximizing productivity of CBM fields in Sohagpur block.

D’souza, Christopher (M-Tech (PE), Department of Earth Science & Petroleum Engineering, College of Engineering Studies, 2015)
Slurry design for vertical shale wells

Salam, Abdus; Goondi, Antaryami Singh (M-Tech (PE), Department of Earth Science & Petroleum Engineering, College of Engineering Studies, 2015)
Study and analysis of radar cross section for targets used in defence technologies: A major project report

Katyal, Anirudh; Tiwari, Himanshu (B-Tech AVE, Department of Aerospace Engineering, College of Engineering Studies, 2015)
Design and analysis of a spar beam for vertical tail of a transport aircraft: A major project report

Krishnakant, Condra; Zia, Noman; Thapa, Sanjay (B-Tech ASE, Department of Aerospace Engineering, College of Engineering Studies, 2015)
CFD analysis of NASA rotor 67 with and without boundary layer control: a major project report

Sarkar, Ajeet; Singla, Bhavesh; Kumar, Navneet (B-Tech ASE, Department of Aerospace Engineering, College of Engineering Studies, 2015)
Optimization of tribological performance of hBN/Al2O3 nano-particles

Gupta, Anchal; Sharma, Kritika; Ahlawat, Vibhor (B-Tech, Department of Mechatronics, College of Engineering studies, 2015)
Design and analysis of automobile radiator

Bourai, Abhishek; Ghildiyal, Shivam; Bisht, Shubham Singh (B-Tech, Department of Mechatronics, College of Engineering studies, 2015)
Modelling of diffusional limitations in styrene acrylonitrile (SAN) bulk copolymerizations and multi-objective optimization of SAN reactors

Mahajan, Rajeshwar (Department of Chemical Engineering, College of Engineering Studies, 2014-12)
Seismic Impedance Inversion and Porosity Estimation from the acoustic impedance with well seismic callibration

Arora, Radhika (BTECh-GSE VIII Sem, Department of Petroleum Engineering & Earth Science, 2015)
Rock Mass Classification and Tunnel Supporting System using RMR and Q-system computation for Kund Region(Okhi Math), Rudraprayag

Kumar, Abhijeet; Choudhary, Uchit; Singh, Pradip (BTECh-GSE VIII Sem, Department of Petroleum Engineering & Earth Science, 2015)
Petrophysical study of alkaline rocks in Kamthai, Barmer, Rajasthan

Kumar, Ankit; Arora, Parry (BTECh-GSE VIII Sem, Department of Petroleum Engineering & Earth Science, 2015)
Petrophysical analysis of wells of Chabua region of Assam basin

Srivastava, Sanskar; Raj, Pushkar (BTECh-GSE VIII Sem, Department of Petroleum Engineering & Earth Science, 2015)
Sequence stratigraphy and paleochannel analysis of Ducth f3 field

Verma, Harshit; Sharma, Sagar (BTECh-GSE VIII Sem, Department of Petroleum Engineering & Earth Science, 2015)
Performance and NOX Emissions of a IDI diesel Engine at Distinct EGR Rates Fuelled With JB100, JB80, JB60, JB40, JB20 & Diesel

Kumar, P Suresh; Antony, Francis; Sahoo, P K (2013)

Engineers have proposed various solutions towards reducing pollutant emissions, especially nitrogen oxides (NOX), from indirect injection diesel engines. The aim of the present work is to investigate the influence of ...
Modelling and simulation of a bio-fuelled conventional engine

Singh, B P; Sahoo, P K (2013)

In the present work, a simulation model based on two different zones of combustion in compression ignition (CI) engines has been modified to predict the performance of a four-stroke CI engine. The modified model for the ...
Reduction 0f NOx Emissions with Three - Way Catalytic Converter For IDI Engine Fuelled With Diesel, JSVO and Their Blends

Kumar, P Suresh; Bhatnagar, Aditya; Sahoo, P K (2013-02)

Petroleum based fuels are obtained from limited reserves. These are finite reserves which are highly concentrated in certain regions of the world. Currently Jatropha biodiesel is receiving attention as an alternative fuel ...
Experimental investigation on the performance and emission characteristics of a diesel engine fuelled with ethanol, diesel and jatropha based Biodiesel blends

Pandey, Shyam; Sharma, Amit; Sahoo, P K (2012-09)

Increasingly stringent emissions regulations and environmental concerns have caused interest in the development of alternative fuels for internal combustion engines. Recently biobutanol, bioethanol and biodiesel emerged ...

Now showing items 741-760 of 851

Search DSpace

Advanced Search

Browse

All of DSpace
This Community
- By Issue Date
- Authors
- Titles
- Subjects

Recently added

School of Engineering: Recent submissions

Search DSpace

Browse

All of DSpace

This Community

My Account