Experimental study of process parameter for surface roughness in WEDM
| dc.contributor.author | Kumar, A. | |
| dc.contributor.author | Dutt, N. | |
| dc.contributor.author | Singh, Varun Pratap et al. | |
| dc.date.accessioned | 2023-07-04T09:12:32Z | |
| dc.date.available | 2023-07-04T09:12:32Z | |
| dc.date.issued | 2022-08 | |
| dc.description | Paper published in the journal - Journal of Mechanical Engineering; Volume 01, Issue 01, pp. 7-13, 2022 | en_US |
| dc.description.abstract | Wire cut Electrical-Discharge Machining (WEDM) is a machining process which utilizes a thin wire (around 0.18mm) for material removal. In modern machining of complex object, it plays an important role. Process parameters have great in-fluence on WEDM. MRR, SR and WT are varying process parameters. In this article surface roughness (SR) in WEDM process was analysed using Taguchi method. To val-idate the results analytical and experimental results were investigated. In experiments it was observed, when peak current value was increased, SR value also increases and in resultant a rough surface was produced. Peak current was observed as most influential parameter with contribu-tion of 82.12%. | en_US |
| dc.identifier.uri | https://doi.org/10.56697/JMEP.2022.1109 | |
| dc.identifier.uri | http://hdl.handle.net/123456789/4203 | |
| dc.language.iso | en | en_US |
| dc.publisher | Jalpaiguri Government Engineering College | en_US |
| dc.subject | Published Papers | en_US |
| dc.subject | Mechanical Engineering | en_US |
| dc.subject | Wire cut Electrical Discharge Machining | en_US |
| dc.subject | Material Removal Rate | en_US |
| dc.subject | ANNOVA | en_US |
| dc.subject | Die Steel Machining | en_US |
| dc.title | Experimental study of process parameter for surface roughness in WEDM | en_US |
| dc.type | Article | en_US |